Nordeck® roofs Norfoam has supplied around North Queensland: the brief, and how each one was built.
An open-air patio over the bay that kept the view of the Magnetic Island sunsets, on a house built among rocks and boulders.
A fly-over design on just two beams and four posts, with the Nordeck® roof spanning 6 m x 6 m. The light panels were easier to get from the Townsville factory across the water and up the dirt roads.
An outdoor room on an upper deck, open span with no internal columns, keeping the forest views and the breeze.
Norfoam suggested 150 mm Nordeck® in a fly-over. Site access was tight, so the team worked with the owners on a temporary route to move the panels from the truck to the roof.
A big entertaining patio added to an existing home, with shade and shelter from sun and rain and a seamless step from inside to out.
A new slab, steel beams bolted to the house, Nordeck® panels on the frame, then gutters and downpipes. The builder chose Nordeck® for its tongue-and-groove joint and long spans on minimal beams.
Covered walkways and entry shade for a busy school.
Free-standing Nordeck® roofs on steel posts, the same panel used in the residential kits.
